CAB Apollo 1 Operator's Manual download pdf (Page 100)

100 cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.

Memory Cards

The printers of the Apollo series provide an option for using memory cards to

permanently save graphics, fonts, complete label formats, or database

information. Data transfer may be performed via interface. Alternatively, the

printer is able to read from cards which has been written on in PC card drives

of lap-tops or other computers, etc.

The Apollo is able to read from PCMCIA version 2.1 compatible sRAM cards

or Flash-EPROM cards. The maximum memory capacity for Apollo 1/2 is 4

MegaByte, and for Apollo 3 16 MegaByte.

It is recommended that you make backup copies in case of malfunction of the

original cards.

Preparing the Memory Card

Fig. 13 s Write protection/ Inserting the battery

The write protection of the card may be activated or deactivated by shifting the

switch (1) located at the front side of the card. The interpretation of the setting

may be read from an imprint (3) on the back of the card.

If you want to format the card or write on it, switch off the write protection.

In case the battery has to be replaced, it is usually found in a slot (2) above the

switch (1).

For replacing or inserting the battery in sRAM cards refer to the instructions of

the manufacturer.

1 2 3

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 138 139

No comments

CAB Apollo 1 Operator's Manual Page 100