CAB Apollo 1 Operator's Manual download pdf (Page 32)

32 cab - Produkttechnik GmbH & Co KG / Tharo Systems, Inc.

5 Connecting the Printer

Connection to Power Supply

Fig. 5 a Power supply module (detailed view/ rear of the printer)

To change the voltage setting, open the cover (2) and remove the voltage

selector from the power unit.

CAUTION !

If you have changed the operating voltage of your printer the fuses need

replacing as stated below !

Apollo 1/2 : 230V - 2 x T 4A 115V - 2 x T 6.3A

Apollo 3 : 230V - 2 x T 1.6A 115V - 2 x T 3.15A

When delivered, the correct fuses for the pre-selected operative voltage are

installed. You will find the necessary fuses for the other voltage in the

accessories package.

Slide the voltage selector back into the power supply module so that the

correct voltage is visible in the lid window (2).

Connect the printer to a grounded outlet using the power cable supplied in the

accessories package.

1 - Voltage selector

2 - Voltage selector

cover

3 - Power switch

4 - Power supply

connector

Apollo 1/2 Apollo 3

The Apollo is designed for use with 230V A.C/ 50Hz (standard) or 115V A.C/

60Hz.

CAUTION !

Before connecting the printer to the power supply, make sure that the

voltage selected on the power supply module of the printer is the same as

your main power supply !

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 138 139

No comments

CAB Apollo 1 Operator's Manual Page 32