CAB Apollo 1 User Manual download pdf (Page 33)

cab - Produkttechnik GmbHENG-32

Error Messages/ Problem Solution

The Apollo is equipped with a comprehensive self diagnostic system which will

indicate errors in the display of the printer. Also, the operator will be informed by

the LEDs whether the fault is correctable and will, therefore, allow to continue the

current print job after corrections (e.g. "Out of paper"), or the fault may require you

to cancel the current print job.

Correctable Errors

While processing a print job, an error has occured which may be corrected by the

operator, and also allows you to continue the print job after fault correction.

The top line of the display shows alternately the type of fault and the total of the

remaining labels of the current print job.

The LED CAN is switched on, the LED PSE is flashing.

Function Keys

CAN key short pressing : Cancels the current print job.

Switch to the next job, which is available

in the input buffer

longer pressing (>1s): Cancels the current print job.

Clears the input buffer

(LED CAN blinks),

Switch into ONLINE mode.(LED ONL on)

PSE key Continues current print job after error correction.

Switch into PRINT mode.

(LED ONL on, LED CAN off, LED PSE off)

Irrecoverable Errors

While switching on the printer or during printing, a fault has occured which cannot

be cleared by the operator without cancelling the current print run.

(e.g. hardware fault)

The display shows the type of fault. The LED CAN is flashing.

Function Keys

CAN key Cancels the current print job.

Switch into ONLINE mode.

(LED ONL on, LED CAN off, LED PSE off)

If ONLINE mode cannot be entered, switch printer off and on

again.

If the fault remains again, contact Technical Service

1 2 ... 28 29 30 31 32 33

No comments

CAB Apollo 1 User Manual Page 33